FH1800 (C) | Ventilation Cabinet

In the chemistry laboratory, various harmful odorous gases, odors, moisture, and corrosive substances are generated during experimental operations. To protect the safety of users and prevent pollutants from spreading into the laboratory during experiments, a fume hood should be used.

Attention: The filter of FH (C) series ductless fume hood has poor adsorption effect on hydrogen, helium, inert gases, methane, ethane, epoxyethane, carbon monoxide, carbon dioxide, nitric oxide, propylene, acetylene, organic phosphorus compounds, mercury, hydrogen cyanide, radioactive isotopes, etc. Generally speaking, the adsorption effect on gases with molecular weight less than 36 is not good, and it is not recommended to use such fume hoods. In addition, such fume hoods cannot be used for experiments involving high volatile chemicals, high smoke emissions, strong acid-base, flammable, explosive, and highly toxic substances.

Rated voltage: AC220V ± 10%

Rated current: 50/60HZ

External dimensions ≥ (L × D × H) 1800mm × 940mm × 2140mm;

The internal dimensions are ≥ (L × D × H) 1710mm × 690mm × 740mm.

Platform to ground height: 900mm;

Inlet wind speed: 0.4-0.6m/s;

Total exhaust volume of the system: 415 m ³/h;

Rated power: 500 W (excluding the power of cabinet socket load (load cannot exceed 500W));

Noise level: ≤ 58dB(A);

Illumination: ≥ 350lx;

Explosion proof fluorescent lamp power: 14W * 3 pieces;

Wooden packaging dimensions: 1950 * 1110 * 2350;

Gross weight: 410KG;